IPv6 No Network Access: Everything You Need to Know and How to Fix It

Whenever you have a problem with your internet connection, it is possible that the “IPv6 No Network Access” issue may cause it. The network connection can catch a lot of errors in itself, but it’s also prone to Windows system errors. In some cases, the Internet network is not to blame for the inability for Windows to get access to the Internet. Instead, the clashes within the system may cause the issue with the internet connection. The noticeable sign you can see in this problem is that the browser of the Windows PC will not be able to access a web page.

In some cases where the “IPv6 Connectivity: No Network Access” error occurs on your Windows 10 PC, some of the problems may happen as the result of this error. One of the issues which most likely happen is the “Internet Explorer cannot display the webpage” and the “No internet secured” error. In a way, the IPv6 plays an important role in rendering the network connection to be used properly on your Windows 10 PC. If there is a problem within the settings of the networking channel, then you may see the IPv6 Connectivity issue occurring on your Windows 10 PC.

---

What Indicates “IPv6 Connectivity: No Network Access” Issue

Many problems in your Windows system can be easily detected if you routinely check on the system update. If you wish to look for network related problems in your Windows PC, then you can try to see the things which can indicate the problem. From “no internet secured” to “the browser cannot display the webpage” issue, the signs vary when the “IPv6 Connectivity: No Network Access” error occurs in your Windows 10 PC.

If you wish to avoid this issue, you can regularly update the Windows Update when needs to. Other than that, you can also head to the section “Network and Sharing Center” from the Windows 10 Settings. Once you get to the Settings, you can try to right-click the network connection your PC is currently connected to and choose the option “Status”. After you get there, you will see the status “No Internet Access” under the section “IPv6 Connectivity”.

In case the status under the “IPv6 Connectivity” says “No network access”, then the DHCP server is probably not detected. Aside from the server not being detected, the local link is nowhere to be found as well. Do not panic when you see this type of problem with the IPv6 Connectivity. When the IPv6 Connectivity states “No internet access”, it’s possible the DHCP server can be detected but the system cannot assign the no-link-local address. In other words, the IPv6 Connectivity may suffer a misconfiguration. If you see this error, then it means the network configuration may have to be fixed.

---

IPv6 Connectivity

When it comes to network error, you may want to check the IPv4 and IPv6 connectivity first. The Internet Protocol Version 6, or commonly known as IPv6, deals with all the communications protocol in your Windows 10 PC. This, in return, can enable the data communications by using a packet of a switched network.

Things you need to know about IPv6 are that it is important for your PC network configuration. Internet Protocol Version 6 is developed by the Internet Engineering Task Force, or shortly known as IETF, to deal with the issues regarding IPv4 address exhaustion. In other words, IPv6 succeeds that of Internet Protocol Version 4 or IPv4’s service. Today, most computers have used the IPv6 configuration instead of the old IPv4 one to manage the network connectivity.

---

The Reasons Why “IPv6 Connectivity: No Network Access” Error Occurs on Windows 10

Due to its recent trial on new versions of Windows system, the IPv6 configuration cannot operate on many old devices. Instead of using IPv6 Connectivity, the old version of Windows system tends to use IPv4 to run the network configuration of the PC. In other words, the IPv6 is only limited to the new Windows version like Windows 10.

Other than the compatibility issue, the old version of Windows system will work as long as the ISP allows it. To make it more complicated, the ISP can only be enabled by default. As such, the compatibility issue affects other things, such as the ISP service, to react. In doing so, it creates the “IPv6 Connectivity: No Network Access” issue on your Windows PC.

While the persistent IPv6 misconfiguration may cause this issue, there are many other factors that contribute to it. Just like many issues involving Windows Modules Installer Worker and System Thread Exception Not Handled, the error will continue to exist if you do not update the drivers in your Windows system. Due to the corrupted, outdated, incompatible network drivers, and faulty IP configuration, the IPv6 misconfiguration may happen. Other than that, the Windows Firewall may also happen to block the connection because of the recent updates.

Despite the only reason being the IPv6 misconfiguration, there can be many factors which contribute to the “No Network Access” issue on your Windows 10 PC. As you may notice earlier, the compatible configuration and the system environment may help the network runs successfully. With that concept being planted in mind, you can realize that one method to fix the issue may not work for everyone. Lucky for you, there are many methods available to fix the “IPv6 Connectivity: No Network Access” error on your Windows 10 PC. Before we jump to the methods to fix this issue, you can see further explanation about the IPv6 Connectivity: No Network Access” below.

---

Problems that May Occur because of “IPv6 Connectivity: No Network Access”

One of the things which may happen when your IPv6 Connectivity configuration suffers from an issue is the inability of your browser to display the webpage. You will see the “Internet Explorer cannot display the webpage” and you must try to fix it immediately or else you will have difficulty in accessing web pages from your computer. In this case, your computer will be fully connected to a working internet network yet the Internet Explorer cannot display the webpage. If you try to open a webpage from Internet Explorer, you will see a message containing the error. Usually, it will show a notification on the center of the page entitled “Internet Explorer cannot display the webpage”.

If you find this type of error, it is possible that there is an issue with your PC’s Network. Most of the “Internet Explorer cannot display the webpage” cases are caused by the issue with IPv4 and IPv6 Internet Protocol Version within the Windows system. Just like the “Internet not secured” issue, this error happens when a certain webpage you wish to open access both of IPv4 and IPv6. This will create confusion in the system which results in the Internet Explorer cannot display the webpage.

Other than the problem with IPv4 and IPv6 connectivity, “Internet Explorer cannot display the webpage” error can be caused by many things. You may also see issues involving DNS issue, Proxy issue, cache or history problems play a role in this error. Keep in mind that you always have to make sure your Internet Network is properly functional. Try to check the IPv4 or IPv6 connectivity with the other browser or the other device near you. Additionally, you can try to disable the VPNs operating in your computer. If you have considered all of these possible problems into account, you can now try to fix the “Internet Explorer cannot display the webpage” error with one of these methods below.

---

No Internet Access on Windows 10

If your computer is connected to an internet network but you cannot open a web page, then it is possible that there are some issues with the router or the IPv6 Connectivity configuration itself. Similarly to “DNS server unavailable” issue, your web browser will not be able to open web pages due to the “IPv6 Connectivity: No Network Access” error occurs. In case this type of error occurs, always make sure to check the internet network configuration and the computer programs which currently run some updates.

If your Windows PC runs updates on different types of programs, you will need to check whether or not the updates clash with one another. The clashes of updates may often contribute to the “no internet access” or “no network access” error. To avoid this type of error, you can check the program which takes up the most internet network space with the Task Manager. Other than that, you can also check the internet network first to see if it operates properly.

Since “IPv6 Connectivity: No Network Access” error can definitely affect your networking activities, you can try to fix it immediately to be able to operate the networking system on your Windows 10 PC without any worries. Whether the problem comes from the misconfiguration of the IPv6 Connectivity or the updates clashes within the system, you can find a way to fix it with the solutions we provide below.

---

Methods to Fix “IPv6 Connectivity: No Network Access” on Windows 10

If you find an issue with your PC’s network configuration, you may want to check the IPv4 and IPv6 connectivity first. The Internet Protocol Version 6 or IPv6, deals with all the communications protocol in your Windows 10 PC. In return, this can enable data communications by using a packet of a switched network.

Things you need to know about IPv6 are that it is important for your PC network configuration. Internet Protocol Version 6 is developed by the Internet Engineering Task Force, or shortly known as IETF, to deal with the issues regarding IPv4 address exhaustion. In other words, IPv6 succeeds that of Internet Protocol Version 4 or IPv4’s service. Today, most computers have used the IPv6 configuration instead of the old IPv4 one to manage the network connectivity.

Without denying the sole reason for the “no network access” error being the IPv6 misconfiguration, you should consider many factors which contribute to this issue on your Windows 10 PC. As you may notice earlier, the main issue with “IPv6 Connectivity: No Internet access” issue is the compatible configuration and the system environment which can make the network access runs successfully. With that concept being planted in mind, you can realize that one method to fix the issue may not work for everyone. Fortunately, there are many methods available to fix the “IPv6 Connectivity: No Network Access” error on your Windows 10 PC. In order to fix the IPv6 Connectivity: No Network Access” issue on your Windows 10 PC, you can take a look at the methods below. See which one works best for you.

---

Running Windows 10 Network Troubleshooter

For every Windows issue occurring on your PC, you can always perform the Troubleshooter to fix it. In order to perform this method, you can follow the steps below.

Step 1: Proceed to open the Windows Settings and click on the section “Update & Security”.

Step 2: Look at the left-hand menu and choose the option “Troubleshoot”.

Step 3: Click on the option “Internet Connections” on the Troubleshoot window.

Step 4: Afterward, proceed to choose the option “Run the troubleshooter”.

Step 5: Then, you can proceed with the on-screen instructions to run the troubleshooter.

Step 6: At last, you can reboot your Windows 10 PC to save and apply the changes. See if the “IPv6 Connectivity: No Network Access” error on Windows 10 PC has been fixed or not.

---

Resetting IPv6 Configuration and Winsock

When it comes to IPv6 error, you can try to reconfigure the IPv6 settings to fix this issue. Along with it, you can also fix the Winsock settings as well. In order to perform this method, you can follow the steps below.

Step 1: Find the Windows icon on your Windows desktop and right-click on it.

Step 2: Proceed to choose the option “Command Prompt (Admin)“.

Step 3: Afterward, you can type the following command into the Command Prompt window and press Enter after each one.

ipconfig /flushdns

nbtstat –r

netsh int ip reset

netsh winsock reset

netsh winsock reset catalog

netsh int ipv6 reset reset.log

Step 4: Close the Command Prompt window after the commands finish the processing.

Step 5: At last, you can reboot your Windows 10 PC to save and apply the changes. Check if the
“IPv6 Connectivity: No Network Access” issue on Windows 10 PC.

---

Restarting Windows 10 Network Adapter

Step 1: Open the Run box by pressing Windows and R buttons at the same time.

Step 2: Afterward, you can type ncpa.cpl and press Enter to open the “Wifi settings”.

Step 3: Proceed to right-click on the wireless adapter your Windows 10 PC has and choose the option “Disable”.

Step 4: Once again, you can right-click on the current adapter of your Windows 10 PC and choose the option “Enable” this time around.

Step 5: At last, you can restart your Windows 10 PC. See if the “IPv6 Connectivity: No Network Access” issue has been solved.

---

Updating Windows Network Drivers

If you wish to update your PC’s network drivers manually, you can go to your PC’s manufacturer site or your network adapter manufacturer first. There, you can find the most recent version of your network driver and proceed to download it.

When your current Windows PC cannot access any web pages, download the network driver from another PC available. Otherwise, you can perform this method by following the steps below.

Step 1: Proceed to press Windows and R buttons to open the Run box.

Step 2: Afterward, you can type devmgmt.msc and press Enter to open Device Manager.

Step 3: Find the section “Wireless Adapter”, right-click on the option “Network Adapters”, and choose the option “Update Driver”.

Step 4: Afterward, proceed to choose the option “Browse my computer for driver software“.

Step 5: Then, you can click on the option “Let me pick from a list of available drivers on my computer“.

Step 6: Proceed to choose the most recent version of network drivers from the list and click Next.

Step 7: Wait until the installation process finishes and reboot your Windows 10 PC to save and apply the changes. Check if the “IPv6 Connectivity: No Network Access” error has ceased to exist from your Windows 10 system.

---

Performing Reset on Windows 10’s Network Components

Step 1: First, you must press Windows and X buttons at the same time.

Step 2: Afterward, you can choose the option “Command Prompt (Admin)”.

Step 3: Then, you can type the following commands into the Command Prompt window and press Enter after each one.

ipconfig /flushdns

ipconfig /registerdns

ipconfig /release

ipconfig /renew

netsh winsock reset catalog

netsh int ipv4 reset reset.log

netsh int ipv6 reset reset.log

pause

shutdown /r

Step 4: In case you receive an “access denied” notification, you can press Windows and R buttons at the same time to open the Run box again.

Step 5: Afterward, you can type regedit in the search box and press Enter.

Step 6: Type the following registry key and press Enter to go to the intended location.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nsi\{eb004a00-9b1a-11d4-9123-0050047759bc}

Step 7: Proceed to right-click on the file “26” and choose the option “Permissions”.

Step 8: At last, click “Add” and type “EVERYONE”.

Step 9: In case the word “EVERYONE” has already been written, you can check the box next to the statement “Full Control (Allow)”.

Step 10: Then, you can click on the button “Apply” and “OK”.

Step 11: At last, you can reboot your Windows 10 PC to save and apply the changes.

---

Disabling the IP Helper Service

Step 1: Open the Run box by pressing Windows and R buttons at the same time.

Step 2: Afterward, you can type services.msc and press Enter.

Step 3: Locate the option “IP Helper service” and proceed to right-click on it.

Step 4: Choose the option “Properties” among many other options on the list.

Step 5: Proceed to click on the option “Stop” if the service is already running.

Step 6: On the “Startup” tab, proceed to choose the option “Disabled”.

Step 7: Afterward, you can click on the button “Apply” and “OK”.

Step 8: At last, you can reboot your Windows 10 PC to save and apply the changes.

---

Disabling IPv6

Step 1: Open the Run box by pressing Windows and R buttons at the same time.

Step 2: Afterward, proceed to type the command below and press Enter.

control.exe /name Microsoft.NetworkAndSharingCenter

Step 3: Then, you can click on the current internet connection your computer is connected to, and open Settings.

Step 4: Proceed to click on the “Properties” option on the “Wifi status” window.

Step 5: Afterward, you can proceed to uncheck the “Internet Protocol Version 6 (TCP/IPv6)” box.

Step 6: Click on the button “OK” and close the window.

Step 7: At last, you can reboot your Windows 10 PC to save and apply the changes.

---

Disabling Antivirus and Firewall Temporarily

Step 1: Look for the Antivirus Program icon from the system tray on the bottom right of the screen and right-click on it.

Step 2: Proceed to choose the option “Disable” to disable it.

Step 3: Then, you can set the duration for which the antivirus will be disabled.

Step 4: After the antivirus turns itself off, you can connect back to your network connection and see if the network access is back on your Windows 10 PC again.

Step 5: Head to the “Settings” of your Windows 10 PC.

Step 6: Proceed to click on the icon “System and Security”.

Step 7: Afterward, you can click on the option “Windows Firewall”.

Step 8: On the left window pane, switch on the toggle next to the option “Windows Firewall” to turn it on or off.

Step 9: Proceed to turn off Windows Firewall.

Step 10: At last, you can restart your Windows 10 PC

Step 11: Now check whether or not the “IPv6 Connectivity: No Network Access” error on your Windows 10 PC has been fixed. Do not forget to turn your Windows Firewall back on.

---

Reinstalling TCP/IP

Step 1: Head to the section “Settings” on your Windows 10 PC.

Step 2: Proceed to click on the option “Network and Internet”.

Step 3: Afterward, click on the section “Network and Sharing Center”.

Step 4: See the right-hand menu and click on the option “Change adapter settings”.

Step 5: Proceed to right-click on the internet connection your computer is currently connected to and choose the option “Properties”.

Step 6: Choose all the items under the section of the current window and proceed to click on the option “Install”.

Step 7: Afterward, you can choose the option “Protocol” on the “Select Network Feature Type” window and click Add.

Step 8: Proceed to choose the option “Reliable Multicast Protocol” and click OK.

Step 9: Once the installation finishes, you can close every window you have opened.

Step 10: At last, you can reboot your Windows 10 PC to save and apply the changes. Check whether or not the “IPv6 Connectivity: No Network Access” issue has disappeared from your Windows 10 PC.